- Remove a screen wiper drive.
- Remove подрулевые switches with holders (the Onboard electric equipment see the Head).
- Remove an insert of the panel of devices.
- Remove a radio receiver (the Onboard electric equipment see the Head).
- Remove a ware box (see Has undressed Removal and installation of a ware box).
- Remove the central console (see Has undressed Removal and installation of the central console).
- Open an ashtray and take out прикуриватель. Turn out screws (arrows) and remove an ashtray From an underside separate a socket of electroconducting of illumination and прикуривателя.
Ashtray removal
- Uncover the block of safety locks, turn out screws of fastening of the block of safety locks and take out it downwards from the panel of devices.
Removal of the block of safety locks
- Turn out screws of fastening and remove the block of management of the anticreeping alarm system (at a corresponding complete set) and the holder of relay K/V from cut of a ware box.
- Remove central дефлекторы, and also elements of management of a heater (see the Head of System of cooling of the engine, salon and air conditioning heating).
- Turn out screws of fastening lateral дефлекторов and remove them.
- Separate a socket of electroconducting of the anticreeping alarm system and remove the display.
- Remove Д/В stoplights.
- Turn out screws of fastening and remove the central holder.
Removal of the central holder
- Separate an aerial and radio receiver socket on the holder of a radio receiver. Take out all electroconducting from directing on the panel of devices.
- Turn out screws of fastening of the panel of devices at the left and on the right.
Screws of fastening of the panel of devices
- Give nuts of fastening of the panel of devices in a drainage trench from an impellent compartment.
Nuts of fastening of the panel of devices
- Installation is carried out in sequence, return to removal.
|