Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation

Removal and installation of the lock of a door of a back (model Corsa and Tigra)

Models Corsa

PERFORMANCE ORDER

Turn out holders of an elevating cord of a cover of a luggage space (arrow) from internal facing. Holders of an elevating cord Remove an internal upholstery from clamps. Disconnect a bar of a drive of the lock (1) from the lock cylinder For this purpose turn a plastic clip and remove it from a bar. Take out a bar from a clip aperture. Bar of a drive of the lock (1) and fixture of the lock (arrow) Give key Torx Т30 lock fixture to a back wall of a door. Installation is made upside-down.

Models Tigra

PERFORMANCE ORDER

Uncover on the holder of the lock. Disconnect a bar of the lock from the cylinder. For this purpose turn a plastic clip and remove it from a bar. Turn out two bolts of fastening of the lock (5). Details 6 ч 8 - a drive of the cylinder of the lock. Drive of the cylinder of the lock of a door of a back of model Tigra Insert the lock and connect to draught. Tighten bolts of fastening with effort of 20 Nanometers. Expose a wedge (1) in a cover (9). For this purpose turn out screws (4) and remove a plate (3). Vertical adjustment is made by means of the plates (2) having a thickness of 1 and 2 mm accordingly. Slightly fix a wedge that it could move. Some times open and close a back door. Thus the wedge is established in longitudinal and cross-section directions. Open a door and tighten screws (4) with effort of 20 Nanometers.