- Grease the lock cylinder. To this purpose are applied special greasing OPEL-ET - № 90018813, a tube in length of 8 sm and a syringe (OPEL-ET - № 90020227), and also a syringe (5 ml). Besides, glycerine or vaseline is necessary.
|
|
At filling with greasing the lock cylinder should be dry. If necessary dry its compressed air. |
- Put on a tube the syringe end. For this purpose heat up a tube on the one hand the hair dryer or hot water and expand разогретый the end with a suitable subject.
- Other end of a tube (length about 35 mm) compress in a vice a little.
- Fill a syringe with special greasing and enter it approximately on 35 mm into the lock cylinder.
- Fill the cylinder of the lock with greasing to its exit from пыльника.
- After greasing some times enter and take out a key and close the lock. Then wipe a key rags.
- Grease dry уплотнители glasses, and all doors with glycerine or vaseline.
|
|