Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of an overlay and bearing beam of bumpers
   Removal and installation of a decorative lattice of a radiator (model since 03.1997 вып.)
   Removal and installation локера a wheel arch
   Removal and panel installation обтекателя a windscreen
   Removal and cowl installation
   Replacement of loops of a cowl
   Removal and installation of a forward wing
   Replacement of an overlay of a back wheel arch (model Corsa and Combo)
   Removal and installation of facing of doors
   Removal and installation of glass of a forward door
   Removal and installation of glass of a back door (model Corsa)
   Removal and installation стеклоподъемника
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock of a forward door
   Removal and installation of the lock of a door
   Protection against freezing of locks and consolidations
   Removal and installation of an external mirror and the e/motor of its drive
   Removal and installation of the case of an external mirror
   Removal, installation and door adjustment
   Removal and installation of a door of a back (model Corsa and Tigra)
   Removal and installation of the lock of a door of a back (model Corsa and Tigra)
   Removal, installation, dismantling and assemblage of the external handle and the cylinder of the lock of a door of a back (model Corsa)
   Натяжитель a seat belt
   Security measures at the reference with emergency преднатяжителем a seat belt and a lateral pillow of safety
   Removal and installation of a forward seat
   Removal and installation of a back seat
   Removal and installation of the central console
   Removal and installation of lateral facing of a foot well of the forward passenger
   Removal and installation of a ware box
   Removal and installation of an internal mirror and installation of a plate of its fastening
   Removal and installation of the panel of devices
   The sdvizhnaja panel of a roof
+ Onboard electric equipment
Cable television access Cable.



Removal and installation of a door of a back (model Corsa and Tigra)

Removal

For simplification of the subsequent installation of electroconducting and hoses before removal adhere to their ends cords. The cord remains in the removed door of a back.


 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. Remove a hose стеклоомывателя.
  3. On model Corsa separate sockets of electroconducting of a cleaner of back glass, the anticreeping alarm system, the e/motor of the uniform lock, heating of glass and extend electroconducting.
  4. On model Tigra disconnect seat belts (1) at the left and to the right of rack B, remove уплотнители (2) in the field of lateral facing from a body, turn out screws of fastening of facing (3) at the left and on the right and remove it. Turn out two screws of fastening of a cover of directing electroconducting.

Fixture of a seat belt (1), уплотнители (2) and facing (3) models Tigra

  1. Establish a support under a back door.
  2. Remove газонаполненный an emphasis from a spherical support on a back door. For this purpose remove a screw-driver lock скобу (1) about a support.

Elements of fastening of a door of a back of model Corsa
1 — Gazonapolnennyj a door emphasis
2 — a door Loop

  1. On model Corsa remove lock скобу and an axis of a loop (2) doors of a back. By means of the assistant remove a back door.
  2. On model Tigra of a loop are fixed from within. Remove a sealant in the field of loops from a back edge of a roof. Wring out a little downwards facing of a roof from the back party and separate a socket of electroconducting of a door of a back. Turn out bolts of fastening of loops and remove a door by means of the assistant.

Fixture a loop of a door of a back of model Tigra

Installation

 PERFORMANCE ORDER

  1. Installation is made upside-down. Fix a door of a back and adjust its position. The backlash in relation to adjoining elements of a body should make 6 mm. The top edge of a door should lie at identical height with the top edge of a roof or below it no more than on 1 mm.
  2. At installation of a new door of a back rearrange on it details from an old door.

On model Corsa it is necessary to drill apertures for a nozzle стеклоомывателя. On cars without back spoiler GSi cut the welded fingers for fastening of a beam of a spoiler at the top of a door. In the presence of spoiler GSi drill additional apertures for spoiler fastening.

  1. On model Tigra track correctness of installation of elements of fastening of seat belts Tighten a bolt of fastening with effort of 35 Nanometers.

Knot of fastening of a seat belt