Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of an overlay and bearing beam of bumpers
   Removal and installation of a decorative lattice of a radiator (model since 03.1997 вып.)
   Removal and installation локера a wheel arch
   Removal and panel installation обтекателя a windscreen
   Removal and cowl installation
   Replacement of loops of a cowl
   Removal and installation of a forward wing
   Replacement of an overlay of a back wheel arch (model Corsa and Combo)
   Removal and installation of facing of doors
   Removal and installation of glass of a forward door
   Removal and installation of glass of a back door (model Corsa)
   Removal and installation стеклоподъемника
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock of a forward door
   Removal and installation of the lock of a door
   Protection against freezing of locks and consolidations
   Removal and installation of an external mirror and the e/motor of its drive
   Removal and installation of the case of an external mirror
   Removal, installation and door adjustment
   Removal and installation of a door of a back (model Corsa and Tigra)
   Removal and installation of the lock of a door of a back (model Corsa and Tigra)
   Removal, installation, dismantling and assemblage of the external handle and the cylinder of the lock of a door of a back (model Corsa)
   Натяжитель a seat belt
   Security measures at the reference with emergency преднатяжителем a seat belt and a lateral pillow of safety
   Removal and installation of a forward seat
   Removal and installation of a back seat
   Removal and installation of the central console
   Removal and installation of lateral facing of a foot well of the forward passenger
   Removal and installation of a ware box
   Removal and installation of an internal mirror and installation of a plate of its fastening
   Removal and installation of the panel of devices
   The sdvizhnaja panel of a roof
+ Onboard electric equipment


Removal and installation of a forward seat

Cars since 09.1998 вып. Can be equipped with a lateral pillow of safety. The lateral pillow of safety is built in from an outer side of a back of a seat of the driver and the forward passenger. The seats having a lateral pillow of safety, are designated by white stripes with an inscription AIRBAG red colour. At operation of a lateral pillow of safety seat covering is broken off on a seam and releases a pillow.

Cars from 09.1998 of release can be completed with a lateral pillow of the safety which have been built in on each side of backs of seats of the driver and the forward passenger. Seats with a lateral pillow of safety are marked by white stripes with a red inscription AIRBAG. At operation of a lateral pillow of safety the seat upholstery is broken off on a seam and releases a pillow. Observe security measures at the reference with system SRS elements. At operation of a lateral pillow of safety the forward seat is replaced in completely (work HUNDRED).


 PERFORMANCE ORDER

  1. Cast away an external cover directing (1).

Overlay of the directing

  1. Turn out screws of fastening and remove an overlay (arrows).
  2. At a corresponding complete set separate a socket of electroconducting of heating of a seat.

Socket of electroconducting of heating of a seat

Before seat removal remove the safety plug which is on the end mechanical натяжителя of a seat belt, insert a plug into the aperture provided for this purpose in натяжителе (marksman)! Thanks to it involuntary operation натяжителя is excluded.

Removal of a safety plug of a seat belt

  1. Shift a forward seat forward and turn out two bolts of fastening from its directing.

Fixture of the directing

  1. Shift a seat back.
  2. Shift directing seats forward and take out a seat upwards from forward holders.

Forward holders of a seat

  1. Pass tap М8 two carving apertures under bolts of fastening of a seat in the car bottom. Clear bolts a wire brush and put on their carving fixing hermetic 90 167 347 or 15 10 177.
  2. Installation is made upside-down. Bolts of fastening of a seat tighten with effort of 20 Nanometers.