Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of an overlay and bearing beam of bumpers
   Removal and installation of a decorative lattice of a radiator (model since 03.1997 вып.)
   Removal and installation локера a wheel arch
   Removal and panel installation обтекателя a windscreen
   Removal and cowl installation
   Replacement of loops of a cowl
   Removal and installation of a forward wing
   Replacement of an overlay of a back wheel arch (model Corsa and Combo)
   Removal and installation of facing of doors
   Removal and installation of glass of a forward door
   Removal and installation of glass of a back door (model Corsa)
   Removal and installation стеклоподъемника
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock of a forward door
   Removal and installation of the lock of a door
   Protection against freezing of locks and consolidations
   Removal and installation of an external mirror and the e/motor of its drive
   Removal and installation of the case of an external mirror
   Removal, installation and door adjustment
   Removal and installation of a door of a back (model Corsa and Tigra)
   Removal and installation of the lock of a door of a back (model Corsa and Tigra)
   Removal, installation, dismantling and assemblage of the external handle and the cylinder of the lock of a door of a back (model Corsa)
   Натяжитель a seat belt
   Security measures at the reference with emergency преднатяжителем a seat belt and a lateral pillow of safety
   Removal and installation of a forward seat
   Removal and installation of a back seat
   Removal and installation of the central console
   Removal and installation of lateral facing of a foot well of the forward passenger
   Removal and installation of a ware box
   Removal and installation of an internal mirror and installation of a plate of its fastening
   Removal and installation of the panel of devices
   The sdvizhnaja panel of a roof
+ Onboard electric equipment


Removal and installation of a back seat

Model Corsa

 PERFORMANCE ORDER

  1. Remove covers (1) loops of a seat.

Covers of loops of a seat

  1. Disconnect both laths of loops and remove a back seat.
  2. Cast away forward a back seat and take out on the right and to the left of its directing safety hairpins (1).

Safety hairpins

  1. Release a screw-driver clamps on left and right directing seats and take out directing of an aperture in a body.

Clamp detachment

  1. Take out a back of a seat from directing of a luggage space.

Compound back of a back seat (model with 03.1993 for 08.1995 вып.)

 PERFORMANCE ORDER

  1. Remove an overlay (1) backs of a back seat from the left and right party. Remove an upholstery around loops (2), having released clamps (3).

Overlays (1), loops (2) and clamps (3) backs of a back seat

  1. Turn out screws of fastening by the left, right and central loop and take out a seat back.

Screws of fastening by a loop

  1. Installation is carried out in sequence, return to removal. Fastening bolts tighten with effort of 20 Nanometers.

Compound back of a back seat (model since 05.1995 вып.)

 PERFORMANCE ORDER

  1. Uncover a luggage space.
  2. Cast away forward half of back of a seat.
  3. Turn out screws of fastening of a lateral overlay and loops to a casing of a wheel arch.
  4. Cast away back half of back, disconnect it from an average support and take out.
  5. Similarly arrive with other half of back.
  6. Installation is carried out in sequence, return to removal. Fastening bolts to an average support tighten with effort of 20 Nanometers, and to a casing of a wheel arch - with effort of 30 Nanometers.

Model Tigra

 PERFORMANCE ORDER

  1. Turn out bolts of fastening of forward holders of a pillow of a seat on the right and at the left. Liberate a skeleton from holders.

Bolts of fastening of holders of a pillow of a seat

  1. Liberate a skeleton from back holders of a pillow of a seat on the right and at the left. Remove a seat pillow.
  2. Disconnect from both parties a plate directing a seat belt (1). From two parties remove the holder (2) Remove a back of a back seat.

Plate directing (1) and the holder (2) seat belts

  1. Establish in holders a seat pillow. Fix forward holders.
  2. Tighten bolts of a back of a seat with effort of 30 Nanometers.