- Remove door facing.
- Remove a protective film. Watch that the film thus has not torn. The torn film stick or replace.
- Turn out bolts of fastening back directing glasses and disconnect a rubber sealant.
Screws of fastening directing glasses
- Take out directing downwards.
- Remove from the cylinder of the lock and the handle of a door draught of the external handle (1), the lock of a door (2) and the internal handle (3). For this purpose turn a plastic clip and disconnect it from a bar. Take out a bar from a clip aperture.
Draught of the external handle (1), the lock of a door (2) and the internal handle (3)
- Separate a socket of the central lock.
- Turn away screws of fastening and remove the lock from a door key Torx Т40.
Bolts of fastening of the lock
- Take out the lock from a door.
- If necessary remove the e/motor of a drive of the central lock.
- Installation is made upside-down.
|