Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of an overlay and bearing beam of bumpers
   Removal and installation of a decorative lattice of a radiator (model since 03.1997 вып.)
   Removal and installation локера a wheel arch
   Removal and panel installation обтекателя a windscreen
   Removal and cowl installation
   Replacement of loops of a cowl
   Removal and installation of a forward wing
   Replacement of an overlay of a back wheel arch (model Corsa and Combo)
   Removal and installation of facing of doors
   Removal and installation of glass of a forward door
   Removal and installation of glass of a back door (model Corsa)
   Removal and installation стеклоподъемника
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock of a forward door
   Removal and installation of the lock of a door
   Protection against freezing of locks and consolidations
   Removal and installation of an external mirror and the e/motor of its drive
   Removal and installation of the case of an external mirror
   Removal, installation and door adjustment
   Removal and installation of a door of a back (model Corsa and Tigra)
   Removal and installation of the lock of a door of a back (model Corsa and Tigra)
   Removal, installation, dismantling and assemblage of the external handle and the cylinder of the lock of a door of a back (model Corsa)
   Натяжитель a seat belt
   Security measures at the reference with emergency преднатяжителем a seat belt and a lateral pillow of safety
   Removal and installation of a forward seat
   Removal and installation of a back seat
   Removal and installation of the central console
   Removal and installation of lateral facing of a foot well of the forward passenger
   Removal and installation of a ware box
   Removal and installation of an internal mirror and installation of a plate of its fastening
   Removal and installation of the panel of devices
   The sdvizhnaja panel of a roof
+ Onboard electric equipment


Care of components of a body and the car bottom

It is necessary to remember that a primary factor defining selling cost of the second-hand car, the condition of its body is. Care procedures кузовными panels are extremely simple, but should be carried out on a regular basis. The scornful relation to the smallest mechanical damages and defects of a paint and varnish covering can lead to fast development of corrosion and necessity of performance expensive кузовного repair. Important also regularly to check a condition of the surfaces hidden from a sight and details, such as arches of wheels, the bottom part of partitions of an impellent compartment, etc.

Base procedure on care of a car body is its sink, preferably plentiful quantity of water, submitted under pressure from a hose. Powerful enough stream easily softens and forces down the dried up dirt and that is important, allows to avoid damage of a paint and varnish covering at a friction about it of separate grains of sand and other abrasive particles. Do not forget to wash out also an arch of wheels and bearing elements of the bottom of the car. Strangely enough, the best time for performance of a sink of elements of a suspension bracket and the car bottom is damp rainy weather when the most part of the accumulated mud adjournment is washed off automatically during movement. Try not to miss possibility and, taking an opportunity, make external survey of the components located under the car.

Once a year, or through each 20 000 km of run it is necessary to make check of a condition of an anticorrosive covering of the bottom of the car. Preliminary it is necessary to subject the car bottom, including an impellent compartment, steam cleaning in which course multilayered oil adjournment, sticky шлам and a dense dirt especially well leave. If possibility of application of steam cleaning is absent, it is necessary to process by means of a brush surfaces of components subject to cleaning by one of set of solvents let out now.

Last method should not be applied on cars, the anticorrosive which covering of the bottom has a wax basis.

Such annual survey of the car should be made before the beginning of a winter season after good размачивания mud and oil adjournment in the conditions of the raised humidity, characteristic for an autumn season. The damaged anticorrosive covering should be immediately restored. In an ideal, once a year it is necessary to make full anticorrosive processing of the car, at which protective structure закачивается in a cavity of door panels, thresholds, box-shaped sections bearing кузовных elements and other accessible volumes.

The last does not concern panels and the sections subjected to full anticorrosive processing and загерметизированным industrially.

Completely having washed off a dirt from a paint and varnish covering, wipe surfaces кузовных panels soft suede, returning to polishing initial shine. Processing of surfaces by a polyrole containing wax provides additional protection of a paint and varnish covering against atmospheric influences and allows to restore locally lost polishing. Remember that tarnishing of a paint and varnish covering is connected with the scornful relation to a regular sink of the car more often.

Wax polishing кузовных panels should be made about time in half a year. Paint and varnish coverings of type "metallic" require special leaving with application of special, not containing abrasives of polyroles. Try to check regularly passableness of drainage and ventilating apertures кузовных panels. Do not forget to wipe from time to time some glass, by means of special cleaning structures deleting from their surface a road film. At all do not use for processing of glasses polyroles containing wax or means for care of the chromeplated elements of furnish.