Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation

Engines

Specifications

The general parametres

The full list of engines and their parametres used for a complete set of models Opel Corsa-B/Combo and Tigra

Volume, sm³

Engine X10XE	973
Engine X12SZ	1196
Engine X12XE	1199
Engines C14NZ, X14SZ, C14SE, X14XE	1389
Engines X16XE, C16XE	1598
Engines 4EC1, X15DT (T4EC1)	1488
Engines 17D (4EE1), X17D (4EE1)	1686

Engine type

Engine X10XE	1.0-12V DOHC
Engine X12SZ	1.2 OHC
Engine X12XE	1.2-16V DOHC
Engines C14NZ, X14SZ, X14SE	1.4 OHC
Engine X14XE	1.4-16V DOHC
Engines X16XE, C16XE	DOHC
The engine 4EC1	1.5 D OHC
Engine X15DT (T4EC1)	1.5 TD OHC
Engines 17D (4EE1), X17D (4EE1)	1.7 D OHC

The release period

Engine X10XE	05.1997 08.2000
Engine X12SZ	03.1993 03.1998
Engine X12XE	03.1998 08.2000
Engines C14NZ, C14SE	03.1993 02.1996
Engine X14SZ	03.1996 08.1998
Engines X14XE, X16XE	09.1994 08.2000
Engine C16XE	09.1993 08.1994
The engine 4EC1	03.1993 08.1996
Engine X15DT (T4EC1)	03.1993 08.2000
The engine 17D (4EE1)	09.1993 02.1996
Engine X17D (4EE1)	03.1996 08.2000

Capacity of the engine, kw/h.p. mines^-1

Engine X10XE	40/55 5600
Engine X12SZ	33/45 4600
Engine X12XE	48/65 5600
Engine C14NZ	44/60 5200
Engine X14SZ	44/60 5400
Engine C14SE	60/82 5800
Engine X14XE	66/90 6000
Engine X16XE	78/106 6000
Engine C16XE	80/109 6000
The engine 4EC1	37/50 4800
Engine X15DT (T4EC1)	49/67 4600
The engine 17D (4EE1)	44/60 4500
Engine X17D (4EE1)	44/60 4400

Twisting moment, Nanometer mines^-1

Engine X10XE	82 2800
Engine X12SZ	88 2800
Engine X12XE	110 4000
Engine C14NZ	103 2800
Engine X14SZ	106 3000
Engine C14SE	114 3600
Engine X14XE	125 4000
Engine X16XE	148 4000
Engine C16XE	150 3800
The engine 4EC1	90 2400
Engine X15DT (T4EC1)	132 2600
The engine 17D (4EE1)	108 2600
Engine X17D (4EE1)	112 2650

Diameter of the cylinder/piston stroke, mm

Engine X10XE	72.5/78.6
Engine X12SZ	72.0/73.4
Engine X12XE	72.5/72.6
Engines C14NZ, X14SZ, C14SE, X14XE	77.6/73.4
Engines X16XE, C16XE	79.0/81.5
Engines 4EC1, X15DT (T4EC1)	76.0/82.0
Engines 17D (4EE1), X17D (4EE1)	79.0/86.0

Compression degree

Engines X10XE, X12XE	10.1
Engine X12SZ	10.0
Engine C14NZ	9.4
Engine X14SZ	9.6
Engine C14SE	9.8
Engines X14XE, X16XE, C16XE	10.5
Engines 4EC1, 17D (4EE1), X17D (4EE1)	23.0
Engine X15DT (T4EC1)	22

Arrangement/quantity of cylinders//Quantity of valves on the cylinder

Engines SOHC	rjadnoe/4//2
Engines DOHC, except X10XE	rjadnoe/4//4
Engine X10XE	rjadnoe/3//4

Operating procedure of cylinders

Engines, except X10XE 1-3-4-2 (the first cylinder is located from outside drive ГРМ).

Engines H10HE 1-2-3

1-2-3

Normal direction of rotation of a cranked shaft

Clockwise.

Kompressionnoe pressure

Petrol engines
Rating value, атм	12 15
The maximum admissible difference Between cylinders, атм	1
Diesel engines
Rating value, атм	Not less than 22
The maximum admissible difference Between cylinders, атм	1.5

The maximum admissible frequency of rotation, rpm

Specifications to the Head of Adjustment and car routine maintenance see.

Working parametres of engines

Head of cylinders

Maximum admissible неплоскостность an interfaced surface, mm
Petrol engines	0.013
Diesel engines	0.025

Height of a head of cylinders, not less, than mm.

Petrol engines
Engines DOHC of 1.0 and 1.2 l	126
Engines OHC of 1.2 and 1.4 l	95.25 0.45
Engines DOHC of 1.4 and 1.6 l	134.70
Diesel engines	131.25

Angle of slope of facets of saddles of valves, hailstones.

45

Valves and directing plugs

Size of a backlash of landing of a core of the valve in the directing plug, mm

Petrol engines
Engines SOHC
Inlet valves	0.018 0.052
Final valves	0.038 0.072
Engines DOHC
Inlet valves	0.030 0.060
Final valves	0.040 0.070
Diesel engines
Inlet valves	0.020 0.200
Final valves	0.030 0.250

Height of the established valves, no more, than mm

Petrol engines SOHC

14.4

Angle of slope of working facets of plates of valves

Engines SOHC	44
Engines DOHC	45

Failure of valves concerning an interfaced surface of a head of cylinders of the diesel engine, mm	0.5 1.0
Выступание the vortical chamber of the diesel engine over an interfaced surface of a head of cylinders of the diesel engine, mm	0.0 0.03

Shatunno-piston assemblages

Size выступания the piston, no more, than mm
Engines OHC of 1.2 and 1.4 l	0.22
Engines DOHC 1.0, 1.2, 1.4 and 1.6 l	0

Greasing system

Pressure of impellent oil, атм
Normal value
Petrol engines	1.5
Diesel engines	2.0
The minimum value
Petrol engines	0.3
Diesel engines	2.0

Type of the oil pump

Petrol engines	Шестеренчатый, With a direct drive From a cranked shaft
Diesel engines	Роторный, with direct A drive from a cranked shaft

The range of pressure regulated редукционным by the valve, bar
Engines 1.0 and 1.2 DOHC	4.4 6.4

Efforts of a tightening of carving connections, Nanometer

Bolts of fastening of wheels	110
Д/В pressure of impellent oil	30

Petrol engines

Engines SOHC

Bolts of fastening of covers of drive ГРМ
External covers	4
Bolts of fastening of a cover газораспределительного the mechanism	8
Bolt of a cogwheel of a camshaft	45
Bolts of a back persistent plate of a camshaft	8
Bolts of a face cover of case GRM	12
Bolts of fastening of the module of ignition	8
Fixture of a reception pipe to a final collector	25
Fixture of the inlet pipeline to a head of cylinders	20
Fixture of a final collector to a head of cylinders	20
Thermostat fixture	10
Bolts of fastening of the water pump	8

Bolt of a pulley cranked вала*

Bolt М12
Stage 1	95
Stage 2	To hold on on a corner on 30 hailstones.
Stage 3	To hold on on a corner 15 hailstones.
Bolt М10х23	22
Bolt М10х23	22
Stage 1	55
Stage 2	To hold on on a corner on 45 60 hailstones.

Bolts of fastening of a head цилиндров*

Stage 1	25
Stage 2	To hold on on a corner 60 hailstones.
Stage 3	To hold on on a corner 60 hailstones.
Stage 4	To hold on on a corner 60 hailstones.
Bolts of fastening of a cover of a flywheel	7
Заглушка редукционного the valve of the oil pump	30
Fastening bolts маслозаборника	8

Bolts of fastening of the pallet картера the engine
Models without К/В (the stamped steel pallet)
Bolts of fastening of the pallet to the block of cylinders / to the oil pump	8
Drain stopper of the pallet	55
Models with К/В (the cast aluminium pallet)
Bolts of fastening of the pallet to the block of cylinders / to the oil pump	8
Bolts of fastening of a flange of the pallet to картеру transmissions	40
Drain stopper	45

* Use new bolts.

Engines DOHC of 1.0 and 1.2 l

Bolts of fastening of the case of drive ГРМ	8
Bolts of fastening of the water pump	8
Fixture of the top prorate of a chain of drive ГРМ	8
Bolts of fastening of a cover of case GRM	8
Bolts of fastening of the module of ignition	8

Bolt of fastening of an asterisk of a camshaft
Stage 1	50
Stage 2	To hold on on a corner 60 hailstones.
Stopper натяжителя chains of drive ГРМ	20
Stopper натяжителя chains of drive ГРМ	60
Stopper of an aperture for a stopper of a cranked shaft	60
The case of the oil filter to a head of cylinders	20
Fixture of the top thermofilter of a final collector	8
Fixture of lock laths of the engine	20
Compressor K/V fixture	20
Fixture of the holder каталитического the converter	15
Fixture каталитического the converter	35
Bolts of fastening of the inlet pipeline to a head of cylinders	20
Bolts of fastening of a final collector to a head of cylinders	20
Fixture of a directing tube щупа level of impellent oil	8
Cover of the case of the thermostat	8
Shtekernaja lath of injectors	8
Pulley of the water pump	20
The bottom holder of a plait of electroconducting to a final collector	10
The top and bottom bolts of a support of a final collector	25
The back holder of a plait of electroconducting to a final collector	6
Valve PCV to the holder of a final collector	6 Nanometers.

Bolts of fastening of a head цилиндров*
Stage 1	25
Stage 2	To hold on on a corner 60 hailstones.
Stage 3	To hold on on a corner 60 hailstones.
Stage 4	To hold on on a corner 60 hailstones.

The oil pump
Fixing bolts	8
Screws of fastening of a cover of the pump	8
Заглушка редукционного the valve	30
Fastening bolts маслозаборника*	8

Bolts of fastening of the stamped steel pallet картера двигателя*
Bolts of fastening of the pallet to the block Cylinders / to the oil pump	10
Bolts of fastening of a flange of the pallet To картеру transmissions	40
Drain stopper of the pallet	10
Dempfirujushchaja plate to the block of cylinders	8

* Use new bolts.

Engines DOHC of 1.4 and 1.6 l

Bolts of covers of drive ГРМ
Back cover	5
Fastening bolt натяжителя a belt of drive ГРМ	20
Fixture of a reception pipe of system of release to a final collector	25
Fixture of a reception pipe of system of release to каталитическому to the converter	18
Fixture of cover ВВ of wires	4
Bolts of a cover of case GRM	8
Bolts of fastening of the top part of the inlet pipeline	8
Bolts of fastening of the inlet pipeline to a head of cylinders	20
Bolts of fastening of a final collector to a head of cylinders	22
Bolts of fastening of a branch pipe throttle заслонки to the top part of the inlet pipeline	8
Bolts of fastening of gauge CKP	8

Bolt of fastening of a cogwheel cranked вала*
Stage 1	95
Stage 2	To hold on on a corner 30 hailstones.
Stage 3	To hold on on a corner 15 hailstones.
Bolt of fastening of a cogwheel distributive вала*	65

Bolts of fastening of a head цилиндров*
Stage 1	25
Stage 2	To hold on on a corner 90 hailstones.
Stage 3	To hold on on a corner 90 hailstones.
Stage 4	To hold on on a corner 90 hailstones.
Stage 5	To hold on on a corner 45 hailstones.
Forward right support of the engine to the holder of the power unit	60
The holder of the power unit to РКПП and an engine support	60
The holder of the power unit right to a head of cylinders	65
The holder of the power unit right to the block of cylinders (model with ГУР)	60
The holder of the power unit back to РКПП	70
The block of amortisation of the engine to a forward longitudinal beam of a frame	65
The block of amortisation of the engine behind to the bottom	65
Bolts of fastening of the block of amortisation of the engine on models with ГУР	29

The oil pump
Fixing bolts	8
Screws of fastening of a cover of the pump	8
Заглушка редукционного the valve	30
Fastening bolts маслозаборника*	8

Bolts of fastening of the pallet картера двигателя*
Models 1.4 and 1.6 l without К/В (The stamped steel pallet)
Bolts of fastening of the pallet to the block of cylinders/ To the oil pump	8
Drain stopper of the pallet	55
Models 1.4 and 1.6 l with К/В (The cast aluminium pallet)
Bolts of fastening of the pallet to the block of cylinders/ To the oil pump	8
Bolts of fastening of a flange of the pallet to картеру Transmissions	60
Drain stopper	45

* Use new bolts.

Diesel engines

The holder of support of the engine to the engine block	45
Dempfirujushchaja support of the engine to a longitudinal beam of a forward frame and to the holder of a suspension bracket	60
Bolts of fastening of covers of bearings of a camshaft	15
Bolts of fastening of a cover of a head of cylinders	8
Bolts of fastening of the bottom cover of a gear belt	10
Bolts of its fastening of a pulley of a cranked shaft	20
Fixture of a tension roller	20
Fixture of a cover of a head of cylinders	8
Fuel highways to ТНВД and to atomizers	25
The top bolts of fastening of a back cover of a gear belt to a head of cylinders	10
Bolts of fastening of a cogwheel of a camshaft	10
Bolts of fastening of a thermofilter of a final collector	10
Bolts of fastening of the inlet pipeline to a head of cylinders	30
Bolts of fastening of a final collector to a head of cylinders	30

Bolts of fastening of a head of cylinders
Stage 1	40
Stage 2	To hold on on a corner 60 75 hailstones.
Stage 3	To hold on on a corner 60 75 hailstones.
Fastening bolts маслозаборника*	8

Bolts of fastening of the steel pallet картера the engine
Bolts of fastening of the pallet to the block of cylinders	10
Drain stopper of the pallet	75

* Use new bolts/nuts.