|
|
Opel Corsa B, Combo, TigraSince 1993-2000 of releaseRepair and car operation |
|
|
Opel Corsa B, Combo, Tigra + Cars Opel Corsa B, Tigra and Combo + Controls and operation receptions - Options and car routine maintenance The routine maintenance schedule The general information The general data on options and adjustments Checks of levels of liquids Check of a condition of tyres and pressure of their rating, rotation of wheels Replacement of impellent oil and the oil filter Check of a condition and replacement of a belt of a drive of auxiliary units Removal of a sediment from the fuel filter of the diesel engine Check of a condition and replacement of the hoses located in an impellent compartment Check of a condition of components Check, service and gymnastics Check of a condition and replacement of brushes Check of system of release of the fulfilled gases Check of brake system Electric equipment check The control of a condition of an anticorrosive covering of a body and the car bottom Check and adjustment of turns of idling and the maximum turns Replacement of a filtering element Check and service Replacement of the fuel filter Check of structure of the fulfilled gases Greasing of locks, loops and emphasis Survey of components of a suspension bracket Check and adjustment клапанных backlashes on the diesel engine Replacement of spark plugs Check of adjustment of a pedal of coupling Replacement of a brake liquid Replacement ATF + Engines + Systems of cooling of the engine, salon and air conditioning heating + Power supply systems, release and decrease in toxicity of the fulfilled gases + Systems of an electric equipment of the engine + Manual 5-step box of a gear change + Automatic 4-step transmission + Coupling and power shafts + Brake system + Suspension bracket and steering + Body + Onboard electric equipment |
Check of a condition of tyres and pressure of their rating, rotation of wheels Every year Check The conscientious attitude to regular check of a condition of tyres will allow the driver to avoid the annoying delays connected with an exit of a wheel out of operation during movement. Besides, on character of deterioration of protectors it is possible to reveal beforehand developments being at a stage defects of components of a suspension bracket and a steering drive. Entering into the standard For an estimation of degree of deterioration of a protector special inexpensive measuring instruments of depth of a profile pattern ную a complete set of cars considered in the present Management are issued the wheels equipped with special display tapes, having about 12 mm and shown on a protector pattern enter width at deterioration of the last to an admissible limit. The minimum admissible depth of a protector makes 1.6 mm. To estimate degree of deterioration of a protector it is possible by means of the special inexpensive adaptation - ask in shops of automobile accessories. For an estimation of degree of deterioration of a protector special inexpensive measuring instruments of depth of a profile pattern are issued
Pay attention to any signs of non-uniform deterioration of a protector Such local defects as чашевидное a wipe, уплощения, etc., balancing of the last are usually obliged by the occurrence to infringements of corners of installation of forward wheels, or. For revealing and elimination of malfunctions the car should be driven away in a specialised workshop of car-care centre or on a car repair shop. The most typical examples of deterioration of protectors
Attentively examine tyres of all wheels on presence of cuts, punctures and got stuck in flutes of a pattern of a protector of extraneous subjects. Sometimes the punched wheel during even any time continues to keep in itself air whereas the subject which has pierced the tyre continues to remain thrust in it. The reason slow спускания tyres defect of a nipple of the gate of a rating of a wheel can be, - check up a nipple condition Attentively examine a protector on presence of the extraneous subjects which have got stuck in it and signs of infringement of tightness of landing of repair "stoppers" with which help repair of small punctures of the tyre is made. To make sure available a puncture simply enough, - it is enough to moisten a suspected site of a surface of the tyre with a solution of soap water - if the puncture takes place, the solution will start to bubble. Insignificant punctures on size are usually easily eliminated in шиномонтажных workshops. If the wheel constantly "lowers", it is necessary to check up serviceability of a condition of a nipple of the gate of a rating
Attentively examine internal walls of tyres of all four wheels on presence on them потеков a brake liquid. In case of revealing of those immediately check up a condition of corresponding brake mechanisms and the hydraulic lines connected to them. Поддерживание demanded pressure of a rating of tyres will allow to prolong essentially service life of wheels, besides, will provide the maximum comfort at movement and will not allow to lower controllability of the car. Remember that correctly to measure pressure in the tyre by eye it is almost impossible, in particular, if it is a question of tyres of a radial design. It is necessary to hold constantly near at hand suitable manometre, - on gaz stations and car repair shops it is not necessary to trust indications of measuring instruments of compressors of pumping. Check pressure of a rating of tyres at cold wheels, - it is meant that the car has passed within last three hours no more than one mile. Remember that increase of pressure on 0.3 0.6 kgs/sm 2 as a result of a wheel warming up is quite natural phenomenon. Remove from the gate of a rating of a wheel a protective cap and densely press a manometre nozzle to a gate exhaust outlet, having wrung out a rod ниппеляСчитайте the read instrument and compare it to the standard data, in case of need correct pressure. Check of pressure of a rating of tyres
Do not forget to screw on a place a protective cap of the gate in order to avoid hit in a moisture and dirt nipple. Check pressure in all wheels, including the spare.
Rotation of wheels Rotation of wheels should be made regularly according to the schedule of routine maintenance of the car, and also at revealing of signs of non-uniform deterioration of protectors. At rotation the car should be lifted over the earth - take advantage of a case and check up also a condition of components of brake system (the Section Check of brake system see). Composers of the given Management recommend to make rotation of the wheels equipped with radial tyres, according to offered schemes the Majority of models are completed with tyres with the directed protector, - the directed tyres are easy for distinguishing on presence on a lateral wall of the arrow specifying a correct direction of rotation of a wheel. The complete set should include two tyres with the right direction of rotation and two - with left. Recommended order of rotation of the wheels completed with tyres With not DIRECTED protector
Recommended order of rotation of the wheels completed with tyres With the DIRECTED protector
The detailed description of procedure of change of wheels is stated in Razdele Poddomkrachivanie and towage. Track reliability of fixing of the car in the lifted position. Will lift most correctly over the earth all car, - use for car fixing in the lifted position less than four props in no event is inadmissible! On termination of rotation check up pressure of a rating of tyres, correct it according to standard requirements. Make sure of reliability of fastening of wheels (in an ideal wheel bolts should be tightened динамометрическим a key and to make repeated check through 40 km of run). More detailed information on wheels and tyres is stated in the Head the Suspension bracket and a steering of the present Management. |
|
||||||||||||||||||||||