Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
- Options and car routine maintenance
   The routine maintenance schedule
   The general information
   The general data on options and adjustments
   Checks of levels of liquids
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   Check of a condition and replacement of a belt of a drive of auxiliary units
   Removal of a sediment from the fuel filter of the diesel engine
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components
   Check, service and gymnastics
   Check of a condition and replacement of brushes
   Check of system of release of the fulfilled gases
   Check of brake system
   Electric equipment check
   The control of a condition of an anticorrosive covering of a body and the car bottom
   Check and adjustment of turns of idling and the maximum turns
   Replacement of a filtering element
   Check and service
   Replacement of the fuel filter
   Check of structure of the fulfilled gases
   Greasing of locks, loops and emphasis
   Survey of components of a suspension bracket
   Check and adjustment клапанных backlashes on the diesel engine
   Replacement of spark plugs
   Check of adjustment of a pedal of coupling
   Replacement of a brake liquid
   Replacement ATF
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Check of a condition and replacement of brushes

Every year

The condition of assemblages of cleaners of a windscreen should be checked regularly according to the schedule of routine maintenance of the car (see Has undressed the routine maintenance Schedule). Brushes look round on presence of mechanical damages, signs of easing of fastening of components and deterioration of rubber working elements.

On working surfaces of brushes the road film that leads to appreciable decrease in efficiency of functioning of screen wipers in due course accumulates. Regularly wash out brushes a cleaning solution of average concentration.

In the course of functioning of screen wipers can occur gradual spontaneous отпускание fixture, reliability of landing and which tightening also should be checked regularly.

At revealing of cracks or signs of deterioration of rubber working elements replacement of brushes is made.

 PERFORMANCE ORDER

  1. Take away the lever of a screen wiper from glass.
  2. Wring out inside a lock uvula and cautiously remove a brush from a hook on the lever end.

For removal of a brush from the lever it is necessary to wring out a lock uvula, then to liberate a framework from a hook

  1. In need of replacement of a working element of a screen wiper strongly compress lock uvulas on the brush end, then grasp an element and, having pulled, take it from a metal framework.

For extraction of a working element from a metal framework compress lateral lock uvulas

  1. Take from a rubber working element metal holders and fill them in grooves of a new element.
Before installation in grooves of a working element in brushes metal holders are got
  1. Fill an element in a framework, having tracked reliability защелкивания lock uvulas.
  2. Put on a brush the lever of a screen wiper and fill it in a hook, having tracked reliability защелкивания a lock uvula.