Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
- Brake system
   The general information
   System of antiblocking of brakes (ABS) - the general information and codes of malfunctions
   Prorolling of brake system
   Check of a condition and replacement of brake lines and hoses
   Replacement колодок disk brake mechanisms of forward wheels
   Removal and installation of brake boots
   Replacement of brake overlays of drum-type brakes
   Condition check, removal and installation of a brake disk
   Removal, check of a condition and installation of a brake drum
   Removal, regenerative repair and installation of supports of disk brake mechanisms of forward wheels
   Removal, service and installation of wheel cylinders of drum-type brake mechanisms of back wheels
   Check of serviceability of functioning and tightness of the vacuum amplifier of brakes
   Replacement and check of the vacuum pump of the servo-driver of the brake amplifier (diesel models)
   Adjustment of a drive of a lay brake
   Removal and installation of cables of a drive of a lay brake
   Replacement of the gauge-switch of stoplights
   The pressure valve-regulator in hydraulic contours of brake mechanisms of back wheels
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Replacement of the gauge-switch of stoplights

 PERFORMANCE ORDER

  1. Separate socket Д/В of stoplights. The switch is above, on an arm of a pedal of a brake.

Contact socket of electroconducting of the gauge-switch of stoplights

  1. Turn Д/В counter-clockwise and remove it from an arm of a pedal of a brake.
  2. Establish Д/В stoplights in a pedal arm, press and fix its turn to the right.
  3. Join a socket of electroconducting Д/В of stoplights.
  4. Check up serviceability of functioning Д/В of stoplights.