Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation


Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
- Engines
   The general information
   Check компрессионного pressure in cylinders and parametres of impellent oil
   Diagnostics of a condition of the engine with vacuum gauge application
   - Procedures of repair of petrol engines SOHC without their extraction from the car
      Removal and cover installation газораспределительного the mechanism
      Removal and installation of a pulley of a cranked shaft
      Removal and installation of a cover of drive ГРМ
      Removal and installation of a belt of drive ГРМ
      Removal and installation of cogwheels of drive ГРМ
      Replacement of an epiploon of a camshaft
      Removal, check of a condition and installation of a camshaft from the case газораспределительного the mechanism
      Removal, check of a condition and installation of valves
      Removal and installation of a head of cylinders
      Removal and pallet installation картера
      Removal, service and installation of the oil pump
      Removal, check of a condition and installation of a flywheel/privodnogo of a disk
      Replacement of epiploons of a cranked shaft
   + Procedures of repair of petrol engines DOHC without their extraction from the car
   + Procedures of repair of diesel engines without their extraction from the car
   + The general and engine major repairs
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal, check of a condition and installation of valves

Removal

 PERFORMANCE ORDER

  1. Remove the case газораспределительного the mechanism
  2. Prepare 8 pure polyethylene bags or plastic glasses, having marked them as numbering of valves (it is possible to take advantage also of the big box divided into eight separate sections). Serially remove levers of a drive of valves, маслоотражательные caps and hydraulic jacks and spread out them on in appropriate way to the marked capacities.
Removal of levers of a drive of valves
Removal маслоотражательных caps
Removal of hydraulic jacks клапанных backlashes

Installation of levers of a drive of valves in any order will lead to infringement of conformity of the form and degree of their deterioration to deterioration of working surfaces of cams of a camshaft!

Check

 PERFORMANCE ORDER

  1. Check up surfaces of levers of a drive of valves contacting to cams on presence of signs of deterioration and mechanical damages, - defective levers replace. In case of revealing of defects of levers check up also a condition of working surfaces of corresponding cams of a camshaft, - most likely they too will appear are damaged or worn out.
  2. Check up a condition маслоотражательных caps, make necessary replacements.
  3. In the absence of confidence of definition of a condition of their hydraulic jacks also it is necessary to replace, - check of serviceability of functioning of jacks is not represented possible.

Installation

 PERFORMANCE ORDER

  1. Grease hydrojacks and walls of their landing nests with pure impellent oil. Establish jacks on the former places.
  2. Establish on valves маслоотражательные caps.
  3. Grease with pure impellent oil levers of a drive of valves and establish them on the former places, supervising correctness of landing on jacks and стрежнях valves.
  4. In summary establish into place the case газораспределительного the mechanism with the camshaft enclosed in it (see Has undressed Removal and installation of a head of cylinders).