Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
- Engines
   The general information
   Check компрессионного pressure in cylinders and parametres of impellent oil
   Diagnostics of a condition of the engine with vacuum gauge application
   - Procedures of repair of petrol engines SOHC without their extraction from the car
      Removal and cover installation газораспределительного the mechanism
      Removal and installation of a pulley of a cranked shaft
      Removal and installation of a cover of drive ГРМ
      Removal and installation of a belt of drive ГРМ
      Removal and installation of cogwheels of drive ГРМ
      Replacement of an epiploon of a camshaft
      Removal, check of a condition and installation of a camshaft from the case газораспределительного the mechanism
      Removal, check of a condition and installation of valves
      Removal and installation of a head of cylinders
      Removal and pallet installation картера
      Removal, service and installation of the oil pump
      Removal, check of a condition and installation of a flywheel/privodnogo of a disk
      Replacement of epiploons of a cranked shaft
   + Procedures of repair of petrol engines DOHC without their extraction from the car
   + Procedures of repair of diesel engines without their extraction from the car
   + The general and engine major repairs
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal and cover installation газораспределительного the mechanism

Removal

 PERFORMANCE ORDER

  1. Uncover an inlet air line a cover of the case throttle заслонки (see the Head of the Power supply system, release and decrease in toxicity of the fulfilled gases).
  2. Ослабьте fixing collars also disconnect hoses from a cover газораспределительного the mechanism.
  3. Turn out bolts of fastening of a cover. Uncover the case газораспределительного the mechanism. If the cover "has become attached" and does not give in to removal, do not hook its lever not to damage interfaced surfaces. Instead for clearing slightly обстучите a cover from sides a hammer with soft the brisk. The damaged sealing lining is subject to replacement.

Installation

 PERFORMANCE ORDER

  1. Before installation examine a cover from within on presence of adjournment of slags and other pollution. In case of need carefully clear a cover, having wiped its moistened in kerosene or other suitable solvent rags. Check up a condition of a filtering element of system of ventilation картера, in case of need wash out its same solvent. For convenience of access to a filtering element it can be removed from a cover, having turned out fixing bolts. Before installation dry wipe a cover pure rags.
  2. Make sure of cleanliness and dryness of interfaced surfaces of a cover and the case газораспределительного the mechanism. Lay a new sealing lining in a reception flute of a cover, having checked correctness of its placing concerning ledges. Accurately, supervising correctness of placing of a lining, press a cover to an interfaced surface of the case газораспределительного the mechanism.
  3. Screw fixing bolts and when due hereunder tighten bolts with demanded effort.

Order of a tightening of bolts fastening of cover ГРМ

  1. Restore initial connection of hoses.