Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation

Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   The general information and safety measures
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of the e/motor of the uniform lock
   Adjustment of range of light
   Removal and installation of the switch and the e/motor of adjustment of range of light (Model Corsa and Combo)
   Removal and installation of the switch of heating of a seat
   Removal and horn installation
   The antijoy ride device and the alarm system
   Replacement of lamps накаливания in headlights
   Replacements of lamps накаливания devices of external illumination
   Replacement of lamps накаливания in headlights, parking fires and forward indexes of turn of model Tigra
   Replacement of lamps накаливания illumination of salon, a luggage space and a ware box
   Removal and headlight installation
   Adjustment of headlights
   Removal and installation of the back combined lantern
   Removal and installation of an antifog headlight
   Removal and installation of a combination of devices
   Removal and installation of measuring devices and indexes
   Removal and installation of control lamps and the printed-circuit board of a combination of devices
   Replacement of a lamp of illumination of the panel of the block of management with heating
   Removal and installation подрулевого the switch
   Removal and installation of switches of a back foggy headlight (antifog headlight) and heating of seats
   Removal and installation of the switch of external and internal illumination
   Removal and installation of the switch of the alarm system
   Removal and installation of the cylinder of the lock of ignition and its contact element
   Radio receiver installation
   Removal and installation динамиков
   Aerial installation
   Removal and installation of a screen wiper of a windscreen
   Removal and installation of the e/motor of a forward screen wiper
   Removal and installation of the e/motor of a back screen wiper
   Removal and tank and pump installation стеклоомывателя
   Check К/Л of low level of a brake liquid
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   + Schemes of electric connections - the general information

Adjustment of headlights

For safety of traffic correct adjustment of headlights has great value. Exact adjustment of headlights is possible only with application of the special device. Долее the arrangement of elements of adjustment of headlights of a condition of performance of correct adjustment is described only.


  1. Check up pressure of a rating of tyres and if necessary modify it.
  2. Load the car in weight of 70 kg (one person) in the centre of a back seat.
  3. Fill a fuel tank.
  4. Establish the car on an equal platform.
  5. Press some times car redock that the forward suspension bracket has occupied the working position.
  6. Establish a regulator of range of light of headlights on the panel of devices in position 0.
  7. Headlights are regulated at the included passing light. The inclination of a beam of light for usual headlights makes 1.2 %, i.e. 12 sm on 10 m of length. The border of light and a shade to the left of a point of the adjustment noted by a dagger, should pass horizontally in the area of adjustment.

Correct position of border of light and shade

  1. At lateral adjustment the border of light and a shade should pass horizontally to a dagger and to go at an angle 15 hailstones. To the right upwards.
  2. Access to adjusting screws is carried out from an impellent compartment. Turn in appropriate way a hand or a crosswise screw-driver adjusting screws () and-or ().

Adjusting screws
A — Adjustment on height
B — Adjustment across

  1. The deviation of a beam of light of an antifog headlight should make 20 sm on 10 m of length. Adjustment is carried out by turn of the adjusting screw.

The screw of adjustment of an antifog headlight