Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   The general information and safety measures
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of the e/motor of the uniform lock
   Adjustment of range of light
   Removal and installation of the switch and the e/motor of adjustment of range of light (Model Corsa and Combo)
   Removal and installation of the switch of heating of a seat
   Removal and horn installation
   The antijoy ride device and the alarm system
   Replacement of lamps накаливания in headlights
   Replacements of lamps накаливания devices of external illumination
   Replacement of lamps накаливания in headlights, parking fires and forward indexes of turn of model Tigra
   Replacement of lamps накаливания illumination of salon, a luggage space and a ware box
   Removal and headlight installation
   Adjustment of headlights
   Removal and installation of the back combined lantern
   Removal and installation of an antifog headlight
   Removal and installation of a combination of devices
   Removal and installation of measuring devices and indexes
   Removal and installation of control lamps and the printed-circuit board of a combination of devices
   Replacement of a lamp of illumination of the panel of the block of management with heating
   Removal and installation подрулевого the switch
   Removal and installation of switches of a back foggy headlight (antifog headlight) and heating of seats
   Removal and installation of the switch of external and internal illumination
   Removal and installation of the switch of the alarm system
   Removal and installation of the cylinder of the lock of ignition and its contact element
   Radio receiver installation
   Removal and installation динамиков
   Aerial installation
   Removal and installation of a screen wiper of a windscreen
   Removal and installation of the e/motor of a forward screen wiper
   Removal and installation of the e/motor of a back screen wiper
   Removal and tank and pump installation стеклоомывателя
   Check К/Л of low level of a brake liquid
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   + Schemes of electric connections - the general information


Replacement of lamps накаливания in headlights, parking fires and forward indexes of turn of model Tigra

Before lamp replacement switch off ignition and the corresponding light device.


 PERFORMANCE ORDER

  1. Disconnect sideways an overlay of a bumper and remove a headlight (see Has undressed Removal and headlight installation).
  2. Separate three sockets (near and far light, and also the index of turn and adjustment of range of light).

Lamp socket накаливания

The turn index

 PERFORMANCE ORDER

  1. Press a cartridge of the index of turn in a reflector direction, release its turn to the left and take out from a reflector.
  2. Take out an old lamp from a cartridge.
  3. Insert into a cartridge a new lamp.
  4. Insert a cartridge into a reflector and fix its turn to the right.
  5. Connect a socket.

Lamps of headlights (distant, near and parking light)

 PERFORMANCE ORDER

  1. Cast away aside both clips and uncover headlights.

Clearing of a cover of a headlight

  1. For replacement of a lamp distant or a passing light separate a socket from a lamp, remove a spring clip of the holder of a lamp from fixing pads and cast away a clip.

Spring clip of the holder of a lamp

  1. Take out a lamp накаливания. Insert a new lamp so that the lamp cartridge has entered into reflector grooves. Thus a lamp take only for a cartridge, instead of for a flask. The traces which have remained on a lamp of hands remove by means of the pure rags moistened in spirit.
  2. Fix a spring clip. Connect a lamp socket.
  3. For replacement of a lamp of parking light release a cartridge turn to the left and take out it from a reflector. Take out a lamp from a cartridge and replace it. Fix a cartridge in a reflector turn to the right.

Installation of a lamp of parking light

  1. Put on a cover a headlight and fix its clips.
  2. Connect two sockets, thus lock pads of a headlight should be fixed.
  3. Establish a headlight and adjust it (the Section Adjustment of headlights see).