Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   The general information and safety measures
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of the e/motor of the uniform lock
   Adjustment of range of light
   Removal and installation of the switch and the e/motor of adjustment of range of light (Model Corsa and Combo)
   Removal and installation of the switch of heating of a seat
   Removal and horn installation
   The antijoy ride device and the alarm system
   Replacement of lamps накаливания in headlights
   Replacements of lamps накаливания devices of external illumination
   Replacement of lamps накаливания in headlights, parking fires and forward indexes of turn of model Tigra
   Replacement of lamps накаливания illumination of salon, a luggage space and a ware box
   Removal and headlight installation
   Adjustment of headlights
   Removal and installation of the back combined lantern
   Removal and installation of an antifog headlight
   Removal and installation of a combination of devices
   Removal and installation of measuring devices and indexes
   Removal and installation of control lamps and the printed-circuit board of a combination of devices
   Replacement of a lamp of illumination of the panel of the block of management with heating
   Removal and installation подрулевого the switch
   Removal and installation of switches of a back foggy headlight (antifog headlight) and heating of seats
   Removal and installation of the switch of external and internal illumination
   Removal and installation of the switch of the alarm system
   Removal and installation of the cylinder of the lock of ignition and its contact element
   Radio receiver installation
   Removal and installation динамиков
   Aerial installation
   Removal and installation of a screen wiper of a windscreen
   Removal and installation of the e/motor of a forward screen wiper
   Removal and installation of the e/motor of a back screen wiper
   Removal and tank and pump installation стеклоомывателя
   Check К/Л of low level of a brake liquid
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   + Schemes of electric connections - the general information



Replacements of lamps накаливания devices of external illumination

Before replacement switch off ignition and the switch of a corresponding lamp.

Forward parking fires and indexes of turn of models Corsa and Combo

Procedure of replacement of lamps of forward parking fires and turn indexes on model Tigra is described in Section Replacement of lamps накаливания in headlights, parking fires and forward indexes of turn of model Tigra.

 PERFORMANCE ORDER

  1. For providing of access to the right headlight remove an air inlet sleeve (see the Head of the Power supply system, release and decrease in toxicity of the fulfilled gases).
  2. Separate a socket on a lamp socle.
  3. Press a lamp cartridge to a reflector, release its turn to the left and take out from a reflector.
Replacement of a lamp of forward parking fire
Replacement of a lamp of the forward index of turn
  1. Take out a lamp from a cartridge.
  2. Insert into a cartridge a new lamp.
  3. Insert a cartridge into a reflector and fix a cartridge turn to the right.
  4. Connect a socket.
  5. At replacement of a lamp of forward right parking fire or the turn index insert into the air filter an air line and fix its sleeve, having turned a clamp on 90 hailstones.

The lateral repeater of turn

 PERFORMANCE ORDER

  1. Cautiously hook the case рассеивателя the lateral repeater of turn by a plastic wedge or the wrapped rags a screw-driver and separate it from a forward wing. Separate a socket.

Removal of the lateral repeater of turn

  1. Take out a cartridge from рассеивателя.
  2. Press a lamp into a cartridge, turn it to the left and take out.
  3. Insert into a cartridge a new lamp and fix its turn to the right. Connect a socket.
  4. Insert a cartridge in рассеиватель and press last into a forward wing.

Antifog headlight

 PERFORMANCE ORDER

  1. Separate a socket from below headlights, thus press a safety hook.
  2. Open a cover of a headlight turn to the left, and disconnect a wire (1).

Wire (1), stopper (2) and a lamp (3) antifog headlights

  1. Press a spring stopper (2) towards a headlight and upwards, then open to the left.
  2. Replace галогенную a lamp (3).
  3. Establish a spring stopper, connect a wire.
  4. Fix a cover turn to the right.
  5. Connect a socket.

The back combined lantern

 PERFORMANCE ORDER

  1. Open a cover in a luggage space for what extend stoppers On model Tigra for this purpose open rotary locks.

Opening of a cover of a luggage space

  1. On three-door model Corsa and on model Combo compress both lock levers and take out a reflector from a back lantern.

Lock levers

  1. On five-door model Corsa press on fixing lever downwards and take out a reflector from a back lantern.

The fixing lever

  1. On model Tigra compress lock pads of the holder of a lamp on the right and at the left and take out the holder of a lamp.
  2. Press into a cartridge a lamp, turn it to the left and take out.
  3. Insert into a cartridge a new lamp and turn it to the left.
  4. Insert a reflector into a back lantern.
  5. Close a cover and fix it.

Lantern of illumination of licence plate

 PERFORMANCE ORDER

  1. On models Corsa and Combo take out by means of a screw-driver a lantern of illumination number of a bumper.

Extraction of a lantern of illumination of licence plate

  1. On model Tigra press to the centre an acting lath of a lantern of illumination of licence plate take out a lantern from a bumper.
  2. Press a lateral lock pad and remove рассеиватель.

Removal рассеивателя

  1. Press a lamp into a cartridge, turn to the left and take out.
  2. Insert into a cartridge a new lamp and turn it to the left.
  3. Establish рассеиватель and fix a lantern in a bumper.