Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation


Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
- Engines
   The general information
   Check компрессионного pressure in cylinders and parametres of impellent oil
   Diagnostics of a condition of the engine with vacuum gauge application
   + Procedures of repair of petrol engines SOHC without their extraction from the car
   + Procedures of repair of petrol engines DOHC without their extraction from the car
   + Procedures of repair of diesel engines without their extraction from the car
   - The general and engine major repairs
      Removal of the power unit from the car - methods and safety measures
      Removal, separation and engine installation
      Alternative variants of schemes of regenerative repair of the engine
      Sequence of dismantling of the engine
      Dismantling of a head of cylinders
      Cleaning and check of a condition of a head of cylinders
      Assemblage of a head of cylinders
      Removal of shatunno-piston assemblages
      Removal of a cranked shaft
      Cleaning and check of a condition of the block of cylinders
      Хонингование mirrors of cylinders
      Check of a condition of components of shatunno-piston group
      Check of a condition of a cranked shaft
      Check of a condition radical and шатунных bearings of a cranked shaft
      Engine assembly order
      Installation of piston rings
      Installation of a cranked shaft and check of working backlashes of radical bearings
      Installation of shatunno-piston assemblages and check of size of working backlashes in шатунных bearings of a cranked shaft
      Trial start and обкатка the engine after major repairs
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Engine assembly order

Before to start engine assemblage, make sure available all necessary details, materials and tools which number the following concerns:

  1. Standard set of the metalwork tool;
  2. Dinamometrichesky key with a drive on 1/2-дюйма;
  3. The tool for putting on of piston rings;
  4. The tool for обжимания piston rings;
  5. Short pieces of a fuel hose for putting on on hairpins of covers шатунных bearings;
  6. Measuring set Plastigage;
  7. Set щупов лезвийного type;
  8. File with a small tooth;
  9. Fresh impellent oil;
  10. Assembly impellent, or молибденсодержащая greasing;
  11. Prokladochnyj hermetic;
  12. Hermetic for fixing of carving connections.

At the given stage all components subject to installation should be absolutely pure and dry. For convenience spread out details on a pure surface as installation.

 PERFORMANCE ORDER

With a view of economy of time and minimisation of volume of arising problems make engine assemblage in a following order:

Petrol engines

  1. Piston rings;
  2. Cranked shaft and radical bearings;
  3. Shatunno-piston assemblages;
  4. The oil pump with маслозаборной a tube (the Part of Procedure of repair of petrol engines SOHC without their extraction from the car or Procedure of repair of petrol engines DOHC without their extraction from the car see);
  5. Balancing assemblage/bridge of radical bearings (depending on a complete set if are provided);
  6. The pallet картера (including маслоотражательную a plate if it is provided) (see the Part of Procedure of repair of petrol engines SOHC without their extraction from the car or Procedure of repair of petrol engines DOHC without their extraction from the car);
  7. Flywheel/privodnoj a disk (the Part of Procedure of repair of petrol engines SOHC without their extraction from the car see);
  8. Head of cylinders with a camshaft () and components of a drive of valves (the Part of Procedure of repair of petrol engines SOHC without their extraction from the car or Procedure of repair of petrol engines DOHC without their extraction from the car see);
  9. The case газораспределительного the mechanism and its cover (the Part of Procedure of repair of petrol engines SOHC without their extraction from the car or Procedure of repair of petrol engines DOHC without their extraction from the car see);
  10. The water pump (see the Head of System of cooling of the engine, salon and air conditioning heating);
  11. Back cover of drive ГРМ (Parts of Procedure of repair of petrol engines SOHC without their extraction from the car or Procedure of repair of petrol engines DOHC without their extraction from the car see);
  12. Components of drive ГРМ (the Part of Procedure of repair of petrol engines SOHC without their extraction from the car or Procedure of repair of petrol engines DOHC without their extraction from the car see);
  13. Forward covers of drive ГРМ (the Part of Procedure of repair of petrol engines SOHC without their extraction from the car or Procedure of repair of petrol engines DOHC without their extraction from the car see);
  14. The inlet pipeline and final collector (see the Head of the Power supply system, release and decrease in toxicity of the fulfilled gases);
  15. Hinged units;
  16. Protective casing of the engine (at a corresponding complete set).

Diesel engines

  1. Piston rings;
  2. Cranked shaft and radical bearings;
  3. Shatunno-piston assemblages;
  4. Hinged units;
  5. The oil pump with маслозаборной a tube (the Part of Procedure of repair of diesel engines without their extraction from the car see);
  6. The pallet картера (including маслоотражательную a plate if it is provided) (see the Part of Procedure of repair of diesel engines without their extraction from the car);
  7. Flywheel/privodnoj a disk (the Part of Procedure of repair of petrol engines SOHC without their extraction from the car see);
  8. Head of cylinders with a camshaft () and components of a drive of valves (the Part of Procedure of repair of diesel engines without their extraction from the car see);
  9. The water pump (see the Head of System of cooling of the engine, salon and air conditioning heating);
  10. Components of drive ГРМ (the Part of Procedure of repair of diesel engines without their extraction from the car see);
  11. The case газораспределительного the mechanism and its cover (the Part of Procedure of repair of diesel engines without their extraction from the car see);
  12. Components of drive ГРМ with a back cover (the Part of Procedure of repair of diesel engines without their extraction from the car see);
  13. Forward covers of drive ГРМ (the Part of Procedure of repair of diesel engines without their extraction from the car see);
  14. The inlet pipeline and final collector (see the Head of the Power supply system, release and decrease in toxicity of the fulfilled gases).