Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation

Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of steering draught
      Removal and installation of a tip of steering draught
      Removal and installation of the tank of liquid ГУР
      Removal of air of hydraulic path ГУР
      Removal and pump GUR installation
      Corners of installation of wheels
+ Body
+ Onboard electric equipment

Removal of air of hydraulic path ГУР

Air should be deleted from hydraulic path ГУР after path opening.

Pump GUR should not work dry.


  1. At the stopped engine uncover the tank.
  2. Fill the tank to the bottom mark (2) Specified mark there correspond to temperature of a liquid +20 hailstones.

Marks on щупе level of liquid ГУР

  1. Start the engine and allow to it to work on single turns. Turn a steering wheel two times on a corner 45 hailstones in both parties and then two times from an emphasis against the stop.
  2. Check up level of a liquid and if necessary add a liquid to the bottom mark on щупе in a tank cover. At the heated-up engine liquid level can reach the top mark on щупе.
  3. If necessary modify level of liquid ГУР, adding the fresh liquid specified in Specifications, small portions.
  4. Close a tank cover.