Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of steering draught
      Removal and installation of a tip of steering draught
      Removal and installation of the tank of liquid ГУР
      Removal of air of hydraulic path ГУР
      Removal and pump GUR installation
      Corners of installation of wheels
+ Body
+ Onboard electric equipment



Removal and installation of steering draught

Removal

 PERFORMANCE ORDER

  1. Remove a tip of steering draught.
  2. Disconnect both collars and remove a casing from steering draught.

Steering draught

  1. Turn out steering draught from the steering mechanism, keeping gear рейку a wrench.

Reversing of steering draught

Installation

 PERFORMANCE ORDER

  1. Screw on gear рейку new steering draught and tighten it with effort of 60 Nanometers, keeping gear рейку from проворачивания a wrench.
  2. If greasing from the steering mechanism left, fill new greasing OPEL 90 018 813 or 19 48 588.
  3. Put on a protective casing and fix its new collars. The casing should not be deformed. It is recommended to replace the collars established at factory with the screw.
  4. Establish a tip of steering draught (look Has undressed Removal and installation of a tip of steering draught).