Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
- Systems of an electric equipment of the engine
   The general information and safety measures
   - Electronic control system of ignition (and injection) petrol engines
      Checks of serviceability of functioning of system of ignition
      Diagnostics of malfunctions - the general information and preliminary checks
      System of onboard self-diagnostics OBD - the general information
      Application of an oscillograph for supervision of working parametres of a control system
      Check of the coil ignitions (engine C14NZ)
      Removal and installation of the distributor ignitions (engine C14NZ)
      Removal and installation of the block of management by ignition DIS
      Check and the basic adjustment of the moment ignitions (engine C14NZ)
      Oktan-correction
   + Systems of preheat and heating of fuel of the diesel engine
   + Charge and start systems
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Oktan-correction

By shift of a socket of the oktan-proof-reader it is possible to adapt the engine for quality of applied fuel. On other engines it is carried out automatically by means of regulation on a detonation. For shift of the moment of ignition the socket of the oktan-proof-reader located in an impellent compartment at the left amortisation rack, is rearranged in position corresponding to applied fuel.

The engine 44 кВт/60 h.p. it is possible to translate with неэтилированного fuel АИ 95 on неэтилированное fuel АИ 91.

60 кВт/82 h.p. it is possible to translate the engine with неэтилированного fuel АИ 95 on fuel АИ 98. If it is necessary to translate the engine on неэтилированное fuel АИ 91, it is necessary to establish the new tip (it is delivered as запчасть).

The socket is in the holder at the right amortisation rack. Established октановое the number is visible before lock скобой.

Site of a socket of the oktan-proof-reader

 PERFORMANCE ORDER

  1. For shift wring out скобу a socket and remove the tip.
  2. Turn the tip on a corner 180 hailstones., insert it again and fix. Insert the tip so that it was possible to read value established октанового numbers. Established октановое the number can be read from outside a clamp.

Change of factory installation, is expedient only in the event that possibility of refuelling of the car is not provided with the fuel established by Specifications, for example, at a finding abroad. It is not necessary to maintain the car on fuel, октановое which number below the value established on the proof-reader. In this case it is necessary to rearrange the tip, differently it is possible to damage the engine.