Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation


Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
- Systems of an electric equipment of the engine
   The general information and safety measures
   - Electronic control system of ignition (and injection) petrol engines
      Checks of serviceability of functioning of system of ignition
      Diagnostics of malfunctions - the general information and preliminary checks
      System of onboard self-diagnostics OBD - the general information
      Application of an oscillograph for supervision of working parametres of a control system
      Check of the coil ignitions (engine C14NZ)
      Removal and installation of the distributor ignitions (engine C14NZ)
      Removal and installation of the block of management by ignition DIS
      Check and the basic adjustment of the moment ignitions (engine C14NZ)
      Oktan-correction
   + Systems of preheat and heating of fuel of the diesel engine
   + Charge and start systems
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of the block of management by ignition DIS

The block of management is located by ignition DIS on a head of cylinders from outside a flywheel. It contains two doubled coils of ignition, and also the shaper of a signal of ignition.


 PERFORMANCE ORDER

  1. Disconnect electroconducting from the block of management of ignition DIS.
  2. Turn out three bolts of fastening of the block of management of ignition DIS to camshaft bed.

Bolts of fastening of block DIS

  1. Establish the block of management of ignition DIS on bed of a camshaft and tighten fixture of the block with effort of 8 Nanometers.
  2. Connect electroconducting at the block of management of ignition DIS.