Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual 5-step box of a gear change
- Automatic 4-step transmission
The general information
Adjustment of the mechanism of a choice of transfers
Removal and installation of a cable of a choice of transfers
Removal and installation of assemblage of the lever of selector AT
Removal and installation АТ
Major repairs АТ - the general information
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Adjustment of the mechanism of a choice of transfers
|
|
Switching-off of the storage battery in position Р of the selector lever will lead to blocking of the last. For lever clearing it is necessary to remove accurately from the central console the sealing element established round its basis, then a small screw-driver with a flat sting to wring out a lock uvula to the left of the selector lever. |
Removal of blocking of the lever of the selector
|
|
- Translate the selector lever in salon from extreme forward position in extreme back, and make sure of conformity of serially chosen positions to indicator indications, - in case of need demanded adjustment.
- Establish the lever in position P.
- For the purpose of providing of access to a cable of a choice of transfers remove the storage battery with the adjusting pallet (see the Head of System of an electric equipment of the engine).
- Find from above on картере transmissions a basic arm of fastening of a cable of a choice of transfer liberate from it a tip of the last, accurately having extended a clamp.
For отпускания a cable tip it is necessary to shift a clamp
- Make sure of that the selector lever is in position Р, then develop the executive lever on картере transmissions forward against the stop, having switched that АТ in position Р Having latched a clamp, fix a cable of a choice of transfers in the given position.
For transfer АТ in position Р it is necessary to develop the executive lever (1) on transmission against the stop forward
- Establish and connect the storage battery, then check up serviceability of functioning of the selector, - in case of need repeat adjustment.
|
|
|
|