Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
- Manual 5-step box of a gear change
   The general information
   Adjustment of a drive of a gear change
   Removal and installation РКПП
   Repair РКПП - the general information
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Repair РКПП - the general information

Composers of the present Management do not recommend to owners of cars to undertake performance of major repairs РКПП independently. During performance of procedures of dismantling and transmission assemblage it is necessary to remove, and then to establish into place set of small components. It is necessary to make weight of the most precise measurements and, by selection of adjusting washers, rings and remote plugs, accurately to expose set of backlashes. In view of all aforesaid, it will be more reasonable to charge performance of major repairs РКПП to experts of car-care centre. We will notice that in many cases there is a possibility on an exchange basis to get the restored block that often there is more cheaply, than a carrying out of difficult repair.

Despite the told, independent performance of repair РКПП by the mechanic-fan at all is not absolutely impossible action. Indispensable conditions are only presence of the necessary special tool and accuracy in the approach to performance of all procedures.

The number necessary for performance of regenerative repair РКПП of tools includes nippers for removal of internal and external lock rings, a stripper of bearings, a hammer with sliding brisk, a set выколоток and кернеров, циферблатный a measuring instrument плунжерного type and, probably, hydraulic press. Besides, it is final, the workbench, or the special assembly stand is required strong, equipped with a vice.

During performance of procedures of dismantling РКПП try to remember, and it is better to write down, an order of installation of each of removed details.

Before to start transmission dismantling, it will be reasonable to try to analyse symptoms of its refusals for the purpose of approximate definition of their reasons. Many refusals are unequivocally connected with failure of quite certain components. The Section Diagnostics of malfunctions see also.