Opel Corsa B, Combo, Tigra

Since 1993-2000 of release

Repair and car operation



Opel Corsa B, Combo, Tigra
+ Cars Opel Corsa B, Tigra and Combo
+ Controls and operation receptions
+ Options and car routine maintenance
+ Engines
+ Systems of cooling of the engine, salon and air conditioning heating
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
- Systems of an electric equipment of the engine
   The general information and safety measures
   + Electronic control system of ignition (and injection) petrol engines
   - Systems of preheat and heating of fuel of the diesel engine
      Check of serviceability of functioning of system of preheat
      Removal, check and installation of candles накаливания
      Check of the relay of candles накаливания
   + Charge and start systems
+ Manual 5-step box of a gear change
+ Automatic 4-step transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal, check and installation of candles накаливания

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. Disconnect from candles накаливания the contact tyre and remove it.
  3. Turn out candles накаливания.

Arrangement of candles накаливания

Check

 PERFORMANCE ORDER

  1. Connect an ohmmeter and measure resistance of a candle. It should make about 0.4 Ohm.

Measurement of resistance of a candle

  1. Submit on a candle накаливания pressure of the battery. For this purpose one wire attach to the candle case, and another - to its carving.

Pressure giving on a candle накаливания

  1. The candle should start to be heated at top of a heating pin. Otherwise replace a candle.

Test spend quickly, otherwise the candle can be damaged.

Installation

 PERFORMANCE ORDER

  1. Screw a candle in a head of cylinders with effort no more than 20 Nanometers.

Excess of effort of a tightening of a candle conducts to increase in a ring backlash between a heating pin both a carving part and to a premature exit of a candle out of operation.

  1. Fix on candles the contact tyre.
  2. Connect a negative wire to the battery.